Check out the latest episodes

Infusing CBD Concentrate in Carrier Oil

CBD products come in a variety of ways and it can be confusing to understand dosing and use.  Make sure you check out our guide to buying CBD for any questions there.

This article will provide assistance for how to take concentrated CBD oil, like what you get in our exact dose syringes, and turn it into tinctures!

Please note: our concentrated CBD oil contains 78%CBD.  This means for every 1 ml (or 1 g) there are 780 mg of CBD oil.

Basic Steps

  1. Determine carrier oil type and desired concentration.
  2. What is the % of CBD inside the concentrate?
  3. Measure and heat the carrier oil to 150 °F.
  4. Add concentrated oil and stir occasionally for 5 to 10 min or until you see no separation of oils (use a glass measuring cup so you can see)
  5. Fill dropper bottles.

Supplies you’ll need

  • 1 liter glass measuring container (beaker)
  • Carrier oil – we prefer MCT Fractionated Coconut oil.
  • 1 oz tincture bottles (note: a 1oz tincture bottle can hold 29.5ml of fluid).  Depending on the amount you want to make you’ll need more bottles.

Using our 1 ml syringes to make tinctures

1 ml = 780 mg CBD oil

  1. Subtract 1 ml from 29.5 ml which equals 28.5 ml
  2. Heat up 28.5 ml of carrier oil to 150º F
  3. Add 1 ml of 78% concentrated oil and stir until oils mix together completely and become homogenized.
  4. Pour into 1 oz tincture bottle.

Each full dropper contains 26 mg of CBD oil.

2 ml = 1,560 mg CBD oil

  1. Subtract 2 ml from 29.5 ml which equals 27.5 ml
  2. Heat up 27.5 ml of carrier oil to 150º F
  3. Add 2 ml of 78% concentrated oil and stir until oils mix together completely and become homogenized.
  4. Pour into 1 oz tincture bottle.

Each full dropper contains 52 mg of CBD oil.

3 ml = 2,340 mg CBD oil

  1. Subtract 3 ml from 29.5 ml which equals 26.5 ml
  2. Heat up 26.5 ml of carrier oil to 150º F
  3. Add 3 ml of 78% concentrated oil and stir until oils mix together completely and become homogenized.
  4. Pour into 1 oz tincture bottle.

Each full dropper contains 78 mg of CBD oil.

Using our 5 ml and 10 ml syringes to make multiple 1 oz tinctures

5 ml = 3,900 mg CBD oil

This is for making 5 tincture bottles.

  1. Subtract 5 ml from 147.5 ml which equals 142.5 ml
  2. Heat up 142.5 ml of carrier oil to 150º F
  3. Add 5 ml of 78% concentrated oil and stir until oils mix together completely and become homogenized.
  4. Distribute equally into 5 – 1 oz tincture bottles

In each bottle, each full dropper contains 26 mg of CBD oil.

10 ml = 7,800 mg CBD oil

This is for making 5 tincture bottles at a higher concentration or 10 tincture bottles.

  1. Subtract 10 ml from 147.5 ml which equals 137.5 ml
  2. Heat up 137.5 ml of carrier oil to 150º F
  3. Add 10 ml of 78% concentrated oil and stir until oils mix together completely and become homogenized.
  4. Distribute equally into 5 – 1 oz tincture bottles or 10 1-oz tincture bottle depending on the amount of CBD you want.

With 5 – 1 oz bottles, each full dropper will contain 52 mg of CBD oil.

With 10 – 1 oz bottles, each full dropper will contain 26 mg of CBD oil

Ask us any questions

These are basic guidelines for how we make tinctures.

If you have any questions, please reach out to us at hello@freedomcbd.co.  Our team is happy to answer questions and ensure that you’re able to maximize the concentrated CBD oil your purchase from us.

 

 

9 + 12 =

FDA Disclaimer: The statements made regarding CBD have not been evaluated by the Food and Drug Administration. The efficacy of CBD products has not been confirmed by FDA-approved research. The Information that you will find on our website are not intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from healthcare practitioners. Please consult your healthcare professional about potential interactions or other possible complications before using any product. The Federal Food, Drug, and Cosmetic Act requires this notice.